Kuro Koiler Wire Coiling Tool w/ Hex Key Kit

$20.00

The Kuro Koiler is a revolutionary new tool that makes winding micro coils a breeze. Made from aluminum and stainless steel the Kuro Koiler is lightweight, portable, and stylish. Using The Koiler you can easily build like a pro making perfectly uniform coils each and every time.

Kuro Koiler Features

  • Revolutionary Patent Pending Micro Coiling Technology, making coils now is a breeze
  • Simply trap your wire, rotate the top cap, and you get that perfect micro coil in seconds, each and every time!
  • Light weight and portable, perfect for traveling, and on the go!
  • Unique styling with stylish colors, each color represent different coil size
  • Blue: CW-20 – Make 2 mm coils
  • Red: CW-25 – Makes 2.5mm coils
  • Purple: CW-30 – Makes 3mm Coils
  • 3.5mm + 3.0mm + 2.5mm + 2.0mm + 1.5mm + 1.0mm winding rods

Directions

  1. Insert wire into the appropriate hole on the side of the handle leaving approximately 1/2” of wire sticking out from the hole in the handle. (For 26-28 gauge wire, use hole 1 for 20-24 gauge wire, use hole 2)
  2. Hold the end of the wire against the handle so it cannot slide back out
  3. Pull the loose end of your wire around the shaft
  4. Place the top winding piece on to the shaft with the pin towards the handle
  5. Turn the top winding piece slowly so it catches the wire and starts wrapping
  6. Be gentle. Excessive pressure will cause the wire to wrap over itself
  7. When the desired number of wraps is reached remove top winding piece and straighten the wire that sticks through the hole in the handle
  8. Remove coil from shaft and adjust or straighten the leads as needed
VN:R_U [1.9.22_1171]
Rating: 5.0/5 (1 vote cast)

4 in stock

Description

Reviews

There are no reviews yet.

Be the first to review “Kuro Koiler Wire Coiling Tool w/ Hex Key Kit”